Limelight Forums

I made this guide, because  said in this thread he will make one, but he never made. So here is the "copy paste" guide!

1)To make your "tram/rollercoaster" you weld your cart/train with the rail connectors in the way show below. Make sure you use the regular weld tool.


2) Take out your tool gun and navigate to the hydraulic tool. Make sure your settings are set like this. Distance and Speed determine how fast the cart will move and for how long(It is tooglable so you should not worry about the distance) This means, the bigger the number the faster it goes, be sensible about how fast it needs to be.


3) Start by creating the first part of the hydralic by placing the first constrain point where the picture shows below. (The first constraint is placed on the back of the cart)


4) Weld it with the front rail connector. (This rail connector is on the front of the cart.)

5) Ready, put it in your railing and toggle it, it should start going forwards.

Nice guide. Good job. Gonna test it out soon